Description
Direct-to-plastic primer has excellent bonding on untreated, solvent resistant plastics. The primer can be overpainted with all common base coat systems (water-based or solvent-based) as well as other 1K and 2K coatings. There is no need to sand or thermally treat the plastic part before application of DTP primer. At least 2 times faster priming on plastic parts than with conventional plastic primers/additives.
– excellent adhesion on various plastic substrates (PP, PP-EPDM, PVC, ABS …)
– the primer should be applied as a wet-on-wet primer (no sanding before application, no sanding after application).
– minimum flash-off time before next coating: 10 min
– maximum flash-off time before next coating: 24 h
– smooth surface of topcoat